Plaster partitions

Become Plaster partitions from purely plaster plates or such, where in quality napolnitelja Slag, sawdust and other is used. The length of such plates varies within 80-150 The sm, width 30-50, thickness 5-7,5 see For maintenance of durability of a design of an edge Plates happen to grooves or grooves and crests. Plates should be well dried They can be made and it is independent, for what the building will be necessary Plaster and slag or sawdust for the additive to it. The form becomes from wooden rejki, If you have decided to use blocks with grooves use rejku the triangular Sections. In each form before pouring of plaster weight krestnakrest keep within Two thin wooden luchiny. At weight manufacturing on 3 parts of plaster undertakes 1 part of a filler, water is added in the mixed dry components in last Turn. Consider that the mix very quickly, for semdesjat minutes, therefore hardens At vymeshivanii and form filling it is necessary to make haste.

the Laying of plates is conducted on gipsovopeschanom a solution with the small additive of joiner's glue for durability. Sand it is possible to take as much, how many and plaster, or even half it is less. To a ceiling the partition is not possible on 12 sm, it is possible to hammer in a crack rejkoj or prokonopatit and to close up a solution. Over established in advance, prior to the beginning of a laying, a door box the crosspiece by pouring by a plaster solution of two, three armaturnyh rods becomes. The crack between a box and a partition is blocked by a platband. After the termination of a laying the partition is plastered by a solution from plaster and to exhaust or sand. The layer makes it about 5 mm.